For a long time, carpeting was only laid by a specialist. Though people now dare to do their renovation, the question repeatedly arises whether carpeting should not be laid single-handedly. The size of the room, in particular, plays a decisive role here: so-called semi-loose installation is possible in small areas that are not exposed to high loads. The tracks are fixed with the help of double-sided adhesive tape, which offers sufficient hold when it is not used. This method is ideal for DIY carpet Cleveland enthusiasts because mistakes can be corrected with no problem. However, for larger rooms with medium to a high frequency of use, full-surface gluing is always recommended. You may decide whether you want to DIY it or leave the installation to a professional.
Optimal Result Needs Careful Planning
and Preparation
If you want to lay your new carpet Cleveland yourself, careful planning is necessary. Before buying:
- Measure the space to be renovated to determine the need.
- Pay attention to the heating and window niches, which should also
be clad in the carpeting.
- Calculate a generous amount so that you can later cover the entire area with no problems. Once you have figured out the sizes of the room, you can then calculate the required product quantity.
Besides planning, preparing the substrate is of great importance for an optimal result. The textile floor can best adhere to a smooth and level screed. Therefore, remove old floor coverings before starting the renovation work and then level out any unevenness in the sub-floor. Then you should place the carpet Cleveland in the room for one to two days so that it can acclimate.
Required Tools and Resources
In addition to standard tools such as a folding rule, pen, and level, you first need a carpet knife to attach carpet Cleveland, which you can use to cut the lengths. This should have a sharp blade, as blunt knives have a higher risk of injury. A cutting edge can also help cut the carpeting in a straight line. With semi-loose fixation, only double-sided adhesive tape is required for attachment. With full-surface gluing, an adhesive must be purchased matched to the back of the floor covering. Depending on the product, it can have a textile or fleece backing. It should be noted that a textile backing always has to be glued, while a fleece backing can also be fixed with adhesive tape.
Attachment by Full-Surface Gluing
Once you have made all the
preparations and bought the necessary tools, you can start laying. Spread out the
strips on the surface so that they overlap a few centimeters. You can then
carry out a so-called double seam cut, in which you cut through both layers at
the same time. This ensures a seamless transition. At the same time, you can
also expose recesses for heating pipes and other fixed components. You can then
start gluing by folding the carpet Cleveland in half and spreading the adhesive
on the screed. Now you can put the folded half back into the glue bed.
Carefully smooth out any unevenness and give sufficient adhesive time to
dry.
